|X, Y, Z Travel||
21 x 16 x 19 in
|A, C Axis Travel||
|Spindle Nose to Table Min/ Max||
1.4 in / 20.4 in (36 mm / 519 mm)
|Max Weight On Table||
330 lbs (150 kg)
6 x .39 in (6 x 10 mm)
|Peak Spindle Motor||
12 hp @ 1,500 rpm (8.9 kW @ 1,500 rpm)
45 ft-lbs @ 1740 rpm (61 Nm @ 1740 rpm)
|Number Of Tools||
CAT, BT, DIN 40
|Max Tool Diameter||
3.5 in ( 89 mm)
|Max Tool Length||
9.8 in (250 mm)
|Max Tool Weight||
15.4 lb (7 kg)
|Max Programmable Feedrate||
945 inches/minute (24 m/minute)
|Rapid Traverse X,Y,Z Axis||
945 in/min, 945 in/min, 945 in/min (24 m/minute, 24 m/minute, 24 m/minute)
|Rapid Traverse A, C Axis||
105.2 in (2,669 mm)
|Required Floor Space||
117.9 x 105 in (2,994 x 2,666 mm)
200-240 VAC / 60 Hz
10 CFM @ 80-100 psi
Hurco VM10Ui Plus
The efficient design of the Hurco 5-axis trunnion table machining centers (U Series) is a key benefit to consider—we use an integrated trunnion table at instead of simply sticking a trunnion table on a 3-axis machining center and passing it off as a 5-axis machine. The integrated trunnion table design provides more clearance in Z compared to other brands.
Benefits of Trunnion 5-Axis Mill
- Easy transition from 3-axis machining. The 5-axis trunnion style machining centers are an ideal configuration for 5-sided machining, especially if you’ve always worked on a 3-axis machine because the trunnion style design uses the same principles as 3-axis (i.e., you still machine in a linear fashion, but you just machine more sides). This means less training, less setup time, and more flexibility.
- More clearance in Z-axis. The integrated design of the trunnion table 5-axis VMC gives you more clearance in Z, especially compared to 3-axis VMCs with a trunnion table added to simulate a 5-axis VMC.
- Seamless integration. Seamless integration of pneumatic and/or hydraulic fixtures is another benefit. We purposely designed the U-Series 5-axis VMCs so you can easily feed the cables for these types of fixtures through the shoulder.
- Better undercut + larger work volume + more torque. Other reasons to choose the trunnion style configuration include better undercut capability because the trunnion rotates +110 degrees compared to the SR’s +92 degrees. Compared to the SR, the trunnion style gives you a larger work volume because you don’t have to compensate for the space used by the swivel head with tool attached. The U-Series trunnion 5-axis mills also have more torque at low rpm.