Hurco VTXUi Performance 5-Axis MC (CAT40, 12K, 48T)

The Hurco VTXUi 5-Axis traveling column trunnion style machining center is an ideal configuration for 5-sided machining. The integrated trunnion table design provides more clearance in Z for larger part capacity compared to other brands.  High torque, fast feed rates, and more standard features than other 5-axis machines makes the trunnion style machining center a perfect fit for 5-sided work.  Exceptional cutting feed rates are achieved with patented high-speed motion technology – resulting in the fastest cut with the best surface finish.

Benefits of Trunnion 5-Axis Mill

  • Easy transition from 3-axis machining. The 5-axis trunnion style machining centers are an ideal configuration for 5-sided machining, especially if you’ve always worked on a 3-axis machine because the trunnion style design uses the same principles as 3-axis (i.e., you still machine in a linear fashion, but you just machine more sides).  This means less training, less setup time, and more flexibility.
  • More clearance in Z-axis. The integrated design of the trunnion table 5-axis VMC gives you more clearance in Z, especially compared to 3-axis VMCs with a trunnion table added to simulate a 5-axis VMC.
  • Seamless integration. Seamless integration of pneumatic and/or hydraulic fixtures is another benefit. We purposely designed the U-Series 5-axis VMCs so you can easily feed the cables for these types of fixtures through the shoulder.
  • Better undercut + larger work volume + more torque. Other reasons to choose the trunnion style configuration include better undercut capability because the trunnion rotates  +110 degrees compared to the SR’s +92 degrees. Compared to the SR, the trunnion style gives you a larger work volume because you don’t have to compensate for the space used by the swivel head with tool attached. The U-Series trunnion 5-axis mills also have more torque at low rpm.



Call for pricing

X, Y, Z Travel

31.5 x 27.6 x 20 in

A, C Axis Travel

+30°/-110°, 360°

Spindle Nose to Table

5.9 in / 26 in

Table Working Surface

23.6 in x 19.7 in

Max Table Load

1,100 lbs

Table T-Slots

5 x .71” on 3.94” centers

Spindle Motor Torque

175 Ft. lbs @ 720 RPM

Spindle Speed

12,000 RPM

Spindle Taper

CAT 40

Number Of Stations


Max Tool Diameter

2.95 in (75 mm)

Max Tool Length

11.8 in (300 mm)

Max Programmable Feedrate

1,378 inches/minute

Rapid Traverse X,Y,Z Axis

1,378 in/min

Rapid Traverse A, C Axis

16.6 rpm

Required Floor Space

107 x 156 x 128 in

Machine Weight

27,560 lbs

Voltage Needed

208-240 VAC / 60 Hz

Power Required

38 KVA

Air Needed

10 CFM @ 80-100 psi

See the machines we are looking to buy